This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

There are two groups of haulage contractors in roundwood transport , those who are contracted direct by the transport buyer and those who are connected to a freight company which in its turn is contracted by the transport buyer. Today the roundwood haulage is dominated by contractors with one to two lorries. The effort of coordinating transportation for a transport buyer is dependent on how many communication contacts that must be managed (how many individual haulage contractors the transport buyer has to work with). A structural change in the sector that leads to a decrease in the number of haulage contractors but an increase in the capacity of each contractor, makes it possible for a transport buyer to coordinate transports with fewer communication contacts. The reason why a company reaches a certain size can be explained by the number of contracts it makes and manages.

This report discusses the IT archetypes "governance strategy" and how it could be linked to the IT benefits at the company. The study is based on IT investments that have taken place in ten banks operating in Sweden today, where the reality was modeled on the basis of a questionnaire survey and an additional interview. The aim was to examine whether it is possible to find any correlation between the governance in the banks and obtained benefits for an IT investments.While the competition is intensifying in most companies there is a greater demand for efficiency in IT. The need for IT solutions is greater than ever and the number of IT investments is increasing significantly in most workplaces today, especially on banks. But even if the investments are increasing in numbers it does not necessarily mean that all types of investments are effective and beneficial to the company.

This report discusses the IT archetypes "governance strategy" and how it could be linked to the IT benefits at the company. The study is based on IT investments that have taken place in ten banks operating in Sweden today, where the reality was modeled on the basis of a questionnaire survey and an additional interview. The aim was to examine whether it is possible to find any correlation between the governance in the banks and obtained benefits for an IT investments.While the competition is intensifying in most companies there is a greater demand for efficiency in IT. The need for IT solutions is greater than ever and the number of IT investments is increasing significantly in most workplaces today, especially on banks. But even if the investments are increasing in numbers it does not necessarily mean that all types of investments are effective and beneficial to the company.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

Background: A patient undergoing surgery will meet many caregivers in different settings pre-, intra- and postoperative in the surgical pathway. Lack of communication is a common digression and the handoff is such an occasion. The purpose is to describe current knowledge about the patients´ right to safe care perioperative. The study is a systematic review (pilot). Result: The handoff was informal, unstructured and inconsistent.

Not all payments that an employee receives are cash salary, but may also be salary benefits. It should not matter in which form an employee receives payment, taxation shall be equal despite the form of salary. Cash salary as well as salary in benefits are covered by a general rule in the Swedish Tax Law and shall therefore be taxed when they have a connection to the work performed. There are exemptions to the general rule as some benefits are tax free. In general, taxation shall be easy to foresee.   The legal rules that are treated in this thesis have a general meaning.

The purpose of this study was to determine if wellness benefits led to any changes in exercise habits among employed postmen. The study was a cross-sectional study carried out by a quantitative method. The collection of data took the form of a questionnaire. The sample consisted of 30 postmen employed at a post office in northern Sweden. The results show that of the postman who use health care benefits, there has been a relatively small change in exercise habits.

The aim of this study was to analyze how discourses about domestic violence emerges in policy and practice, and to investigate how those discourses may change from a structural, political level to a local, practical level. The research questions focused how the problem of domestic violence is formulated at national and local level, scrutinizing the different discourses framing and reproducing the causes and solutions of the problem, and also to deduce how different context affects formulations. The empirical material consists of policy plans and interviews with social workers. The findings indicates that the issue of domestic violence is articulated differently on different levels. In action plans on the national level, the domestic violence is formulated within a structural discourse, being a problem on a (gender-) political level, whereas professional social workers recognizes domestic violence as a personal problem within an individual oriented discourse.

The product structure of the fuel tank installation is one of the most complex product areas at Scania. Caused by the number of parameters, which affect the fuel tank installation, a product structure is created which is very difficult to handle. Knowledge exist that the structure in a nearby future will be considerable more complex. The purpose of the study has been to understand in why this complexity exist and find ways to break the trend of a growing product structure. The goal was to achieve a more standardized fuel tank installation.A theoretical study was performed in order to bring knowledge in relevant areas both in general theory but also in documentation at Scania.

The annual cost of home care services of transport in Falun/Borlänge, is now at 31 million kronor. It is clear from previous research that it is possible to reduce these costs through a restructuring of the existing home-help service. The restructuring aims to have a higher proportion of older people, who are in need of care, to live in special accommodation, in order to reduce transport costs. Therefore there is a need for systems that allow home-help service to plan their operations in such a way that transport is working as efficiently as possible. Through better planning, there are profits to be done.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

From January 1st 2011 the use of Eurocode will be mandatory for all constructionprojects. Eurocode is the common European set of struc-tural design codes which willreplace BKR (Boverkets Kon-struktionsregler). BKR is the Swedish set of structuraldesign codes that was used up until December 31 2010. For consulting firms this willcre-ate a need for them to invest in the standards and in education for thecoworkers. This will involve both time and costs for the company.The purpose and aim of this master thesis is the development of compute examplesand calculations aid by dimensioning with Euro-code.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

This bachelor thesis covers fire protection methods of structural steel and the aim is to develop an information tool designed for inexperienced structural engineers. The information tool covers basic fire protection methods and the general way to produce a fire resistance for structural steel. The layout of this information tool is a simple folder that contains information about the most important steps when producing fire protection for a steel structure.The thesis starts with a general overview of the fire protection needed in buildings to fulfill national legislative and regulatory requirements. To get an understanding of how steel components behave during the influence of fire, a brief overview is presented of the material properties of steel. This chapter also contains a review of previous research in the area.